Speed Breakers & Speed Bumps for Effective Traffic Calming
Premium Quality PVC, Rubber & Cast Iron Speed Breakers
Control vehicle speed and enhance safety with TMR's range of industrial-grade speed breakers. Engineered for durability, visibility, and performance in parking lots, residential complexes, and commercial facilities across India.
Choose the Right Speed Breaker for Your Needs
Three distinct types of speed breakers to meet diverse application requirements
PVC Speed Breakers
Advantages:
Rubber Speed Bumps
Advantages:
Cast Iron Speed Breakers
Advantages:
Speed Breaker Technical Specifications
Compare specifications across our range of speed breakers
| Specification | PVC Speed Breaker | Rubber Speed Bump | Cast Iron Speed Breaker |
|---|---|---|---|
| Dimensions (W×L×H) | 250×350×50 mm | 350×500×50 mm | 350×600×75 mm |
| Material | High-impact PVC | Recycled rubber compound | High-grade cast iron |
| Weight (per unit) | 2.5 kg | 8 kg | 25 kg |
| Load Capacity | Up to 10 tons | Up to 20 tons | Up to 40 tons |
| Color | Yellow/Black | Yellow/Black | Yellow/Black |
| Reflectivity | Reflective strips | Cat-eye reflectors | Painted reflective |
| Installation | Bolt-down | Bolt-down | Bolt-down/Embedded |
| Warranty | 1 year | 2 years | 5 years |
| Price Range | ₹450-600/unit | ₹800-1200/unit | ₹1800-2500/unit |
Dimensions (W×L×H)
PVC
250×350×50 mm
Rubber
350×500×50 mm
Cast Iron
350×600×75 mm
Material
PVC
High-impact PVC
Rubber
Recycled rubber compound
Cast Iron
High-grade cast iron
Weight (per unit)
PVC
2.5 kg
Rubber
8 kg
Cast Iron
25 kg
Load Capacity
PVC
Up to 10 tons
Rubber
Up to 20 tons
Cast Iron
Up to 40 tons
Color
PVC
Yellow/Black
Rubber
Yellow/Black
Cast Iron
Yellow/Black
Reflectivity
PVC
Reflective strips
Rubber
Cat-eye reflectors
Cast Iron
Painted reflective
Installation
PVC
Bolt-down
Rubber
Bolt-down
Cast Iron
Bolt-down/Embedded
Warranty
PVC
1 year
Rubber
2 years
Cast Iron
5 years
Price Range
PVC
₹450-600/unit
Rubber
₹800-1200/unit
Cast Iron
₹1800-2500/unit
Custom sizes available: We also manufacture speed breakers in custom dimensions to meet specific project requirements. Contact our sales team for custom sizing and bulk pricing.
Professional Installation Guidelines
Proper installation is crucial for the effectiveness and longevity of speed breakers
Pre-Installation Checklist
Installation Steps
Positioning
Place the speed breaker sections in the desired location. Ensure proper alignment and spacing between sections. Standard spacing between speed breakers should be 10-15 meters for effective speed control.
Marking
Mark the drilling points through the pre-drilled holes in the speed breaker. Use a marker or chalk to indicate exact drilling locations on the road surface.
Drilling
Drill holes at the marked points using a masonry drill bit appropriate for the road surface material. Hole depth should be 50-75mm depending on the anchor type used.
Anchoring
Insert appropriate anchors (expansion bolts for concrete, wedge anchors for asphalt). Ensure anchors are flush with or slightly below the surface.
Securing
Place the speed breaker over the anchors and secure with washers and nuts. Tighten firmly but avoid over-tightening which may damage the material.
Testing
Test the installation by driving over the speed breaker at low speed. Check for any movement or noise. Tighten further if necessary.
Recommended Tools
Maintenance Tips
Frequently Asked Questions
Get answers to common questions about our speed breakers
The standard size for PVC speed breakers is 250mm (width) x 350mm (length) x 50mm (height). This size is effective for slowing vehicles to 10-15 km/h and is suitable for residential and commercial parking applications. Custom sizes are also available upon request.